COMMITTEE
    Chinese                                Top Contributors

Technology Program Co-chairs

Prof. Dongsheng Liu, FRSC, Department of Chemistry, Tsinghua University, China

Prof. Ng Yin Kwee, Nanyang Technological University, Singapore

Dr.Tomasz Długosz,Department of Telecommunication and Teleinformatics, Faculty of Electronics, Wroclaw University of Technology,Poland

Technical Program Committee

Dr. Wenli Cai, Radiology Department, Massachusetts General Hospital, Havrad Medical School, Boston MA USA

Dr. Jonghwan Lee, Martinos Center for Biomedical Imaging, Massachusetts General Hospital, Harvard Medical School, Boston MA USA

Prof. Linhong Deng, Director of Key Lab of Biorheological Science and Technology, Ministry of Education, Bioengineering College, Chongqing University, China

Prof. Kien Wen Sun, Department of Applied Chemistry & Associated Director, Center for Nano Science and Technology, National Chiao Tung University, Taiwan(China)

Prof. Donglu Shi, The Institute for Biomedical Engineering & Nano Science, Tongji University, China

Prof. Hsueh-Fen Juan, Department of Life Science, Institute of Molecular and Cellular Biology, Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, Taiwan

Prof. Chiranjib Chakraborty, Department of Bio-informatics, School of Computer and Information sciences, Galgotias University, India

Prof. Shu-Jen Chen, Department of Chemical and Materials Engineering, National Kaohsiung University of Applied Sciences, Taiwan(China)

Prof.Ming Zhang,Interdisciplinary Division of Biomedical Engineering,Faculty of Engineering,The Hong Kong Polytechnic University, Hongkong(China)

Dr. Ponnurengam Malliappan Sivakumar, Nanomedical Engineering Lab, Japan

Dr. Sen Yang, West China College of Stomatology, Sichuan University, China

Dr. Judilynn N. Solidum, College of Pharmacy, University of the Philippines, Philippines

Dr. Solhe F. Alshahateet, Department of Chemistry Faculty of Science, Mutah University, Jordan

Dr. Nini Rao, School of Life Science and Technology, Chengdu University of Electronic Science and Technology, China

Dr. Abel Fernando do Nascimento Pinto, Freelancer HSEQ Consultant, Portugal

Dr. Hakim Naceur, University of Valenciennes, France

Prof. Ronggui Li, N. Bethune College of Medicine, Jilin University, China

Dr. Salah Akkal, Department of chemistry, University of Constantine, Algeria

Dr. Jianbo Sun, Department of Microbiology and Immunology College of Physicians and Surgeons, Columbia University, USA

Dr. Bassam Moslem, Rafik Hariri University, Lebanon

Prof. Zeyun Yu, Department of Electrical Engineering and Computer Science, University of Wisconsin, USA

Dr. Ze Jia, School of Microelectronics and Solid-State Electronics, University of Electronic Science and Technology of China, China

Dr. Md. Asaduzzaman Khan, Department of Biochemistry, School of Biological Science & Technology, Central South University, China

Dr. Chang Ho Hwang, Department of Biomedical Engineering, University of Ulsan College of Engineering, Korea

Dr. Yanfang Rui, Emory University, USA

Dr. Dayong Gao, Department of Bioengineering, University of Washington, USA

Dr. Bezerianos Anastasios, Cognitive Engineering Lab, National University of Singapore, Singapore

Dr. Ahmad Ashoori, University of British Columbia, Canada

Dr. Chih-Lang Lin, Insistute of Biomedical Engineering and Materials Science, Central Taiwan University of Science and Technology, Taiwan(China)

Dr. Wenli Zhou, Tianjin Agricultural University, China

Dr. Achraf El Allali, Department of Computer Science and Engineering, University of South Carolina, USA

Dr. Giuseppe Carbone, Laboratory of Robotics and Mechatronics, University of Cassino, Italy

Dr. Fei Yu, Technology Licensing Intern, USC Stevens Institute for Innovation, USA

Dr. M Iqbal Saripan, Department of Computer and Communication Sys. Engineering, Faculty of Engineering, Universiti Putra Malaysia, Malaysia

Dr. Hong Liu, Institute of Materials Research and Engineering, Singapore

Dr. Madalina Albu, Department of Bioresources and Polymer Science, University Politehnica of Bucharest, Romania

Dr. Ljuba Bacharova, International Laser Centre, Slovak Republic

Dr. Donghua Liao, Aalborg Hospital, Aalborg University Hospital and Aarhus University, Denmark

Dr. Fang Tang, Hong Kong University of Science and Technology, Hongkong(China)

Dr. David Hoey, Dept. of Mechanical, Aeronautical and Biomedical Engineering, University of Limerick, Ireland

Dr. Jin-Woo Jung, Dept. of Computer Science and Engineering, College of Engineering, Dongguk University, Korea

Dr. Ivica Kopriva, Ruđer Bošković Institute, Croatia

Dr. Hee-Jo Lee, School of Mechanical Engineering, Yonsei University, Korea

Dr. Joseph Baloyi, Department of Animal Science, University of Venda, Republic of South Africa

Dr. Carlos Fernandez-Llatas, ITACA Institute, Universidad Politecnica de Valencia, Spain

Dr. Ghulam Murtaza, Department of Pharmaceutical Sciences, COMSATS Institute of Information technology, Pakistan

Dr. Karras Dimitrio, Automation Department, School of Technological Applications, Chalkis Institute of Technology, Greece

Dr. Patrizio Arrigo, Institute of Macromolecular Studies (ISMAC), Italy

Dr. Chui Ping, School of Science and Technology, SIM University, Singapore

Dr. Alf O Brubakk, Medical Faculty, Norwegian University of Science and Technology, Norway

Dr. Hossein Mousavi Hondori, UC Irvine, USA

Dr. Frederico Pratas, INESC-ID, Portugal

Dr. Elbadawy A. Kamoun, Polymeric Materials Research Department, Advanced Technological & New Materials Research Institute (ATNMRI), Egypt

Dr. Branko Kolaric, Laboratory of Interfaces and Complex Fluids, University of Mons, France

Dr. Claudio De Lazzari, Inter-University Consortium National Institute of Cardiovascular Research (INRC), Italy

Dr. José Antonio Sanz, Department ofContinuum Mechanics and Structures, University of Seville, Spain

Dr. Adriana Setchi, Laboratory of Heat and Mass Transport at Micro-Nano Scale, Peking University, UK

Dr. Chun-Yuan Lin, Department of Computer Science and Information Engineering, Chang Gung University (CGU), (Taiwan) China

Dr. Ahmet Pasinli, Department of Mechanical, Ege University, Turkey

Dr. Falk Liebner, Department of Chemistry, BOKU University, Austria

Dr. Filippo de Monte, Mechanical Engineering, University of L'Aquila, Italy

Dr. J Suwanprateeb, National Science and Technology Development Agency, Ministry of Science and Technology, Thailand

Dr. Fredrik Ståhl, Department of Automatic Control, Lund University, Sweden

Dr. James Gilbert, Department of Engineering, University of Hull, UK

Prof. Kang Ning, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, China

Dr. Jose Ignacio, Department of Applied Mathematics, Technical University of Madrid, Spain

Dr. Katsunori Ishii, Graduate Schoool of Engineering, Osaka University, Japan

Dr. Jongee Park, Metallurgical and Materials, ATILIM University, Turkey

Dr. Clemens Heitzinger, School of Mathematical and Statistical Sciences, Arizona State University, Austria

Dr. Ming-Ching Chang, Dept. of Computer Science, State University of New York, USA

Dr. Boyle Cheng, Department of Neurosurgery, Drexel University School of Medicine, USA

Prof. Grover, A.K, Department of Medicine, McMaster University, Canada

Dr. Gregor Drummen, Bio & Nano-Solutions, Cellular Stress and Ageing Program

Dr. Ilaria Catapano, Institute for Electromagnetic Sensing of the Environment, National Research Council of Italy (IREA-CNR), Italy

Dr. Albena Daskalova, Institute of Electronics, Bulgarian Academy of Sciences, Bulgaria

Prof. Hsien-Tsai Wu, Department of Electrical Engineering, National Dong Hwa University, (Taiwan) China

Dr. Haifeng Wang, Yale University, USA

Dr. Junfeng Zhang, Bharti School of Engineering, Laurentian University, Canada

Dr. Haiying Wang, School of Computing and Mathematics, University of Ulster, UK

Dr. Gregorio Romero, Mechanical Engineering and Manufacturing Department, Technical University of Madrid (UPM), Spain

Dr. Bruno Rizzuti, Department of Physics, University of Calabria, Italy

Dr. Habib, Anwer Khaled, Department of Medicine, Emory University, USA

Dr. Mehdi Kargar, Department of Computer Science and Engineering, York University, Canada

Dr. Carlile Lavor, the State University of Campinas, Brazil

Prof. Habib Zaidi, Medical school, University of Geneva, Switzerland

Dr. Ali Asadian, London Health Sciences Centre, University Hospital, Canada

Dr. Gustavo Plaza, Material Science Department, Universidad Politécnica de Madrid, Spain

Prof. Jiang Li, Electrical and Computer Engineering, Old Dominion University, USA

Prof. Xinying Wang, Imaging Research, Sunnybrook & Women’s College Health Science Centre, Canada

Prof. Jolanta Prywer, Institute of Physics, Lodz University of Technology, Poland

Dr. Schilke Karl, Chemical/Biological/Environmental Engineering, Oregon State University, USA

Dr. Jean-Pierre Leburton, Electrical and Computer Engineering, University of Illinois, USA

Prof. Nawrès KHLIFA, Medical Image Processing, Higher Institute of Medical Technologies, ISTMT, Tunisia

Dr. Daniel Gustavo Goroso, Divisão de Medicina de Reabilitação Faculdade de Medicina Usp, Laboratorio de Movimento, Brazil

Dr. Khalid Mohammad Jaber, Al-Zaytoonah University of Jordan, Jordan

Dr. Gustavo J. Almeida, Department of Physical Therapy, University of Pittsburgh, USA

Dr. Francisco Cruz Sosa, Biotechnology Department, Metropolitan Autonomous University Iztapalapa Campus, México

Dr. Bin Deng, Syracuse University, USA

Dr. Ainara Garde, Electrical & Computer Engineering in Medicine research group, University of British Columbia, Span

Dr. Aishuang Xiang, Chemical and Biological Engineering Department, Princeton University, USA

Prof. Giovanni Angiulli, Department DIIES, University Mediterranea, Italy

Dr. Filippo Molinari, Department of Electronics and Telecommunications, Politecnico di Torino, Italy

Dr. Adil Deniz Duru, Sport Health Science, Marmara University, Turkey

Dr. Hongyun Tai, School of Chemistry, Bangor University, UK

Dr. Guoxin Ni, Nanfang Hospital, Southern Medical University, China

Dr. Areeya AEIMBHU, Department of Physics, Srinakharinwirot University, Thailand

Dr. Suparerk Janjarasjitt, Department of Electrical and Electronic Engineering, Ubon Ratchathani University, Thailand

Prof. Jim Phillips, Department of Biomedical Technology, University of Johannesburg, UK

Dr. Daniel Heath, BioSystems and Micromechanics, Singapore-MIT Alliance for Research and Technology, Singapore

Dr. Inkyu Moon, School of Computer Engineering, Chosun University, Korea

Dr. Daniel Martinez Sierra, Department of Engineering Science and Ocean Engineering, National Taiwan University, (Taiwan) China

Dr. Ning Jin, Siemens Medical Solutions USA Inc, USA

Dr. Antonios Papadakis, Medical Physicist with the Medical Physics Department, University Hospital of Heraklion, Greece

Dr. Hervé Liebgott, Electrical Engineering Department (GEII), University of Lyon 1, University Institute of Technology (IUT Lyon 1), France

Prof. Bartosz Rozycki, Institute of Physics, Polish Academy of Sciences, Poland

Prof. Alessandro Vergara, University of Naples "Federico II", Naples, Italy

Dr. Suz Kai Hsiung, Department of Medical Laboratory Sciences and Biotechnology, Fooyin University, (Taiwan) China

Dr. Christian Celia, Department of Nanomedicine, Methodist Hospital Research Institute, USA

Dr. Andrea Bassi, Department of Physics, Politecnico di Milano, Italy

Dr. Tomasz Dlugosz, Institute of Telecommunications, Teleinformatics and Acoustics, Wroclaw University of Technology, Poland

Dr. Elia Marin, University of Padova, Italy

Prof. Adnane Abdelghani, Head of Nanotechnology Laboratory, National Institute of Applied Science and Technology, Tunisia

Dr. Carlos Nelson Elias, Instituto Militar de Engenharia, Laboratório de Biomateriais, Brazil

Dr. Chuah Tong Kuan, School of Chemical & Biomedical Engineering, Nanyang Technological University, Singapore

Dr. Friederike J. Gruhl, Karlsruhe Institute of Technology (KIT), Institute of Microstructure Technology (IMT), Germany

Prof. Joung H. Mun, Department of Bio-Mechatronic Engineering, Sungkyunkwan University, South Korea

Dr. Antonio Ramón Lazaro Guillén, Department of Electronic, Electric and Automatic Engineering, Universitat Rovira i Virgili, Span

Dr. Elena Ibarz, Mechanical Engineering Department, University of Zaragoza, Span

Dr. Wei Cao, the University of Tokyo, Japan

Prof. Cheng-Chih Hsu, Yuan Ze University, (Taiwan) China

Dr. Alfredo Pulvirenti, Computer Science, University of Catania, Italy

Prof. Ivo Bukovsky, Department of Instrumentation and Control Engineering, Czech Technical University, Czech

Dr Benjamin J Jones, Brunel University, UK

Dr. Giovanna Sannino, Institute for High-Performance Computing and Networking (ICAR), National Research Council, Italy

Dr. Maria Gracheva, Physics Department, Clarkson University, USA

Dr. Jenghwa Chang, Department of Radiation Oncology, Weill Cornell Medical College, USA

Dr. Julian Bostock, Cardiac Physiology Lead for Research, Guy’s & St. Thomas’, UK

Dr. Kamil Duziński, Institute of Animal Breeding, Wroclaw University of Environmental and Life Sciences, Poland

Prof. Hailan Lian, Materials Science and Engineering Department, Nanjing Forestry University, China

Dr. Henrique Amaral, School of Medicine of Ribeirao Preto, University of Sao Paulo, Brazil

Dr. H.Baazaoui, A.Moreno, University Rovira i Virgili, Spain

Dr. Francesco Gentile, Department of Experimental and Clinical Medicine, Magna Græcia University, Italy

Dr. Joseph Alexander Brown, University of Guelph, Canada

Dr. Che-Lun Hung, Department of Computer Science and Communication Engineering, Providence University, (Taiwan) China

Dr. Liu Qing, Institute of Microelectronics, Agency for Science, Technology and Research (A*STAR), Singapore

Dr. Mohammed Abdullah Mohammed Alolfe, Biomedical Engineering Department, Science and Technology University, Yemen

Dr. Fatih Dumludag, Department of Physics, Marmara University, Turkey

Dr. Ye Fang, Science and Technology Division, Corning Incorporated, USA

Dr. Haiyan Cen, Biosystems Engineering (USDA/ARS Lab), Michigan State University, USA

Dr. Seo InSeok, Physiology and Biophysics, Johnson and Johnson Consumer Products Company, Korea

Dr. Israel Sánchez, Department of Computer Systems Engineering and Automation, National Autonomous University, Mexico

Prof. Dennis Sullivan, Electrical and Computer Engineer, University of Idaho, Moscow

Dr. Guillermo Botella, Department of Computer Architecture and Automation, Complutense University of Madrid, Spain

Dr. Jerome Feret, INRIA Paris-Rocquencourt, France

Dr. Hong Yin, Division of Materials Science and Engineering, Commonwealth Scientific and Industrial Research Organisation, Australia

Dr. Abida Raza, Diagnostics Department, Nuclear Medicine, Oncology and Radiotherapy Institute (NORI), Pakistan

Prof. Handan Arkin-Olgar, Faculty of Engineering, Ankara University, Turkey

Prof. Dimitar Tz. Dimitrov, Facultu of Telecommunication, Technical University of Sofia, Bulgaria

Dr. Brendan Gilmore, School of Pharmacy, Queen's University Belfast, UK

Dr. Yudong Xie, School of Mechanical Engineering, Shandong University, China

Prof. Alberto Arteta, Department of Applied Mathematics, University of Madrid, Spain

Dr. Henry Fatoyinbo, Centre for Biomedical Engineering, University of Surrey, UK

Dr. Pietro Hiram Guzzi, School of Computer Science and Biomedical Engineering, University "Magna Græcia" of Catanzaro, Italy

Dr. Erkan Zeki Engin, Electrical & Electronics Eng. Department, Ege University, Turkey

Dr. Ing Javier Voos, Córdoba UTN University, Argentine

Dr. Yifei Chen, School of Information Science, Nanjing Audit University, China

Dr. Jan Cizek, Faculty of Mechanical Engineering, Brno University of Technology, Czech

Dr. Zhisheng Wu, Beijing University of Chinese Medicine, China

Dr. Adriane Mara de Souza Muniz, Federal University of Rio de Janeiro, Brazil

Prof. Giuseppe de Pietro, Università degli Studi di Napoli “Federico II”, Italy

Dr. Joanna Stasiak, Department of Chemical Engineering & Biotechnology, University of Cambridge, UK

Dr. Kevin Jordan, Dept of Physics and Engineering, London Health Sciences Centre, Canada

Dr. Dilek Göksel-Duru, IBogazici University, Turkey

Dr. Xiaoxi Liu, University of California, USA

Dr. Vincent To Yee Ng, Department of Computing, The Hong Kong Polytechnic University, (Hong Kong) China

Prof. Azza Mahmoud Mazrouaa, Petrochemicals department, Egyptian Petroleum Research Institute (EPRI), Egypt

Dr. Mykola Budnyk, Institute of Cybernetics, Ukraine

Prof. Hazry Desa, School of Business Innovation and Technopreneurship, University Malaysia Perlis, Malaysia

Dr. Jose Manuel Garcia Aznar, Mechanical Engineering Department, University of Zaragoza, Spain

Dr. Chouki Zerrouki, Conservatoire National des Arts et Métiers de Paris, Laboratoire de Conception de Capteurs Chimiques et Biologiques, Paris

Prof. Alan H.S. Chan, Department of Systems Engineering and Engineering Management, City University of Hong Kong, (Hong Kong) China

Prof. Dimitris Lymperopoulos, Department of Electrical and Computer Engineering, University of Patras, Greece

Dr. Gianfranco Politano, Politecnico di Torino, Italy

Dr. Eric Fanchon, CNRS in the TIMC-IMAG laboratory, France

Dr. Rigoberto Martínez Méndez, Faculty of Engineering, Autonomous University, Mexico

Prof. Franco Bertora, Department of Communication Computer and System Sciences, University of Genoa, Italy

Dr. Eric Wade, Department of Computer Science, USC Viterbi School of Engineering, USA

Prof. Javier Fernández González, Dept. Material Science and Engineering Metallurgy, University of Barcelona, Spain

Dr. Wang-Long Li, Department of Materials Science and Engineering, National Cheng Kung University, (Taiwan) China

Dr. Maria Abreu, Departamento de Engenharia Têxtil, Escola de Engenharia da Universidade do Minho, Portugal

Dr. Eric Chow, Brain Computer Interface (BCI) Lab, Purdue University, USA

Prof. M Iqbal Bhatti, Principal Ziauddin College of Biomedical Engineering, Ziauddin University, Pakistan

Dr. Elena Ibarz, Mechanical Engineering Department, University of Zaragoza, Spain

Dr. Jai-Won Byeon, Dept. of Materials Science & Engineering, Seoul National University of Science and Technology, Korea

Dr. Emmanouil Moschidis, Centre for Imaging Sciences, University of Manchester, UK

Dr. Jianwen Wang, Department of Safety, Health, and Environment, Chung Hwa University of Medical Technology, (Taiwan) China

Dr. Emilia Noorsal, Faculty of Electrical Engineering, University Technology Mara, Malaysia

Dr. Ekaterina Borisova, Institute of Electronics, Bulgarian Academy of Sciences, Bulgaria

Dr. Isaac Jamieson, European Commission, UK

Prof. Gang Zheng, School of Computer and Communication Engineering, Tianjin University of Technology, China

Prof. Shaoyin Duan, Zhongshan Hospital, Xiamen University, China

Prof. Bogdan-Vlad Avarvarei, Department of Management of animal productions, University of Agricultural Sciences and Veterinary Medicine, Roma

Prof. Yougen Wu, Hainan University, China

Dr. Gaofeng Liang, School of Biological Science and Medical Engineering, Southeast University, China

Dr. Angelo H. All, Department of Biomedical Engineering, Johns Hopkins University, USA

Dr. Ingrid Pirker-Binder, Institut BiCo & psychotherapeutische Praxis, USA

Prof. Dusan SIMSIK, Department of Automation, Control and Human - Machine Interactions, Technical University of Košice, Slovakia

Dr. Mohd Hafiz Fazalul Rahiman, School of Mechatronic Engineering, Universiti Malaysia Perlis, Malaysia

Dr. Georg Duftschmid, Medical Informatics, Medical University of Vienna, Austria

Dr. Dong-Wook Kim, Department Healthcare Engineering, Jeonbuk National University, Korea

Dr. Joanna Brzeska, Gdynia Maritime University, Poland

Dr. Yongzhong Wang,University of Tennessee,Knoxville, TN, USA

Dr. Wei Li, International Joint Cancer Institute, The Second Military Medical University, China

Dr. Peng Li, School of Control Science and Engineering, Shandong University, China

Dr. Márcio de Paula, Supervisor of the Laboratory of Scanning Electron Microscopy,Institute of Chemistry of São São Carlos - IQSC/USP*, Brazil

Dr. Antonio Gloria, the Institute of Composite and Biomedical Materials, National Research Council, Italy

Dr. H.Mobasheri, Laboratory of Membrane Biophysics and Macromolecules (LMBM), Institute of Biochemistry and Biophysics(IBB), University of Tehran (UT), Iran

Dr. Solhe F. Alshahateet, Department of Chemistry Faculty of Science, Mutah University, Jordan

Dr.Yiquan Wu, Materials Science and Engineering,Kazuo Inamori School of Engineering,New York State College of Ceramics,Alfred University,USA

Dr. ELIZABETH A.THOMPSON, Department of Engineering, Indiana University-Purdue University Fort Wayne, US

Dr. Aurélio Faria, Sports Science Department, Research Center in Sport Sciences, Health Sciences and Human Development (CIDESD),University of Beira Interior, Portugal

Dr. Agnès DROCHON, Centre de Recherches de Royallieu, Université de Technologie de Compiègne, France

Dr. Hang Chang, Lawrence Berkeley National Laboratory, US

Dr. Abida Raza, Head Diagnostic Labs, Nuclear Medicine, Oncology and Radiotherapy Institute (NORI), Pakistan

Dr. Boris Oreshkin, Department of computer science and operations research, Université de Montréal, Montréal, Québec, Canada

Dr. Daniele Soria, School of Computer Science, University of Nottingham, UK

Daejoong Kim, Department of Mechanical Engineering, Sogang University, Rep of Korea

Dr. Ricardo J. Ferrari, Department of Computer Sciences, Federal University of São Carlos (UFSCar), Brazil

Dr.Ida Idayu Muhamad, Department of Bioprocess Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, Malaysia